Everett's NCD SuDu "Pro"totype

[EverettY]

Well I finally pretty much have my XR10 running so I'd figure I'd post up the build thread I was originally going to run a T1e Special Ops so Dr Frank gave me an extremely good deal on his lightly used 1 piece skid and Ti Links... So I was going to order the chassis a couple weeks ago but Nick has been really busy so I wasn't able to get it.... I have a competition this coming Sunday so I've really been trying to get it ready so when I found out I couldn't get the chassis in Time I was a little disappointed... but I was talking to Tomi at NCD and we got talking about the SuDu Pro and he ended up sending me his Chassis that he had sitting on his shelf So I got it and just made one screw hole bigger and I was able to use the 1 piece skid that I got from Frank and the links are the perfect length. Exactly 12.5" fully compressed So He shipped the chassis last week Wednesday and I got it on Tuesday of this week... I also ordered up some DLux Revolutionary cross braces for it as well. So I just finished putting the chassis completely together and getting the links all mounted up today and I'll be glueing up the wheels and tires tomorrow and finishing up the electronics... Kinda last minute but it'll be fun Here's a run down of the parts on it...

~NCD SuDu Pro Prototype Chassis
~NCD LW Battery Mount
~NCD Electronics Mount
~NCD CF Rear Brace
~VP Wraith Knuckles
~VP Upper Link Mounts F/R
~VP Motor Plates Lighten By CW Crawlers Thanks Calvin they look awesome!
~SCX10 Aluminum shocks... Thanks to Del Monte for the great deal And Hopefully since they've been on a rig that's won ECC and many other competitions that'll help them perfrom well on here
~RC Bros knuckle weights I'm running .8 oz per side at the moment but will probably end up adding more
~ 5mm Hollow Ti Lowers 3mm Ti Uppers
~One Piece Skid
~Drilled RC4wd Gears
~CW Crawlers Nylon Glue Wheels
~CW Crawlers Aluminum Bead Blasted Steering arms
~Chaotic Crawlers custom Bent 1/8" Tierod
~Losi Boss Claws Shaved
~Crawler Innovations 5.25” DD Foams Soft outers Narrow inners F/R
~Aluminum Hardware almost everywhere....
~Team Brood Vapor 4 Magnet Type ST 35t with Ground, Polished, Dyed, Epoxy balanced arms...ceramic bearings, team brushes, team springs...
~Dual Micro Sidewinders
~Futaba BLS157HV
~Futaba 4PL
~CC BEC
Electronics smashed by my Brother MitchellY Thanks for the awesome job!

Weight right now RTR minus the Wheels and hubs is 3 lbs 5.2 oz.






That's the 2 ESC's BEC and RX all in one small package

[Jakerz]

I like it! that electronics package is nuts lol! I need to talk to Tomi about getting one of those battery mounts also.

Looks clean bud! Keep us posted!

Jake

[boosted4lyf]

So.....so.....sooo

Looks decent kiddo. Sure has alot of purple.

[Oz Bruiser]

Looks great mate. If the online covesrion tool is correct at the its just over 1500grams at the specified weight. I know thats with out wheels and tyres and i presume battery onboard but thats very light.

I hope my missing components will be ready soon for my own as its stalled currently.

Try to get some footage at the comp as yours and Josh's will be the first SuDu Pros comped i think.

[MitchellY]

Originally Posted by Jakerz

I like it! that electronics package is nuts lol! I need to talk to Tomi about getting one of those battery mounts also.

Looks clean bud! Keep us posted!

Jake

Thanks! Over 3 tedious hours of work went into that smashing job.... Turned out pretty good I think, and Everett's happy with it so that's what counts

Originally Posted by Oz Bruiser

Looks great mate. If the online covesrion tool is correct at the its just over 1500grams at the specified weight. I know thats with out wheels and tyres and i presume battery onboard but thats very light.

Actually that weight is with tires. Fully RTR weight minus wheels

[winnerone23]

Well well well, you been busy young man.. No wonder you haven't posted much lately..

Looks very nice! One heck of a parts line up you got. I agree, lets see some video of it on the rocks. I like this chassis..

No servo guard!?!?! ... :eek:

[EverettY]

Originally Posted by Jakerz

I like it! that electronics package is nuts lol! I need to talk to Tomi about getting one of those battery mounts also.

Looks clean bud! Keep us posted!

Jake

The battery mounts are great! Nice and simple Oh and ask for my LW design

Thanks!

Originally Posted by boosted4lyf

So.....so.....sooo

Looks decent kiddo. Sure has alot of purple.

LOL thanks! Ahh the purple doesn't stop there... I'll have some more custom purple stuff still to come...

Originally Posted by Oz Bruiser

Looks great mate. If the online covesrion tool is correct at the its just over 1500grams at the specified weight. I know thats with out wheels and tyres and i presume battery onboard but thats very light.

I hope my missing components will be ready soon for my own as its stalled currently.

Try to get some footage at the comp as yours and Josh's will be the first SuDu Pros comped i think.

Yep like Mitchell Said that's everything but the wheels and hubs

I'm looking forward to yours running

I will do that and it'll be fun I'm excited to see how both of them do at the comp...

Originally Posted by winnerone23

Well well well, you been busy young man.. No wonder you haven't posted much lately..

Looks very nice! One heck of a parts line up you got. I agree, lets see some video of it on the rocks. I like this chassis..

No servo guard!?!?! ... :eek:

Ok course I'm busy... LOL

Video will be shot and I'll just have to figure out how to use Final Cut to edit it

LOL wanna give me one?

[TedBull]

Damn Everett, You did good. That's a hell of a truck you got there. I like it.

[redrokin00XJ]

HOT DAMN!!!!!! Ev...... Good job buddy, I like it a lot. This whole time I thought you didn't have an XR.... j/p


This is sick, you did it right. However I did expect more PURPLE lol

[douwe]

Great work Everett, o really like to see how it performs.. nice list of parts and very nice weights

[Tomy]

Very clean wiring job!

[roxx]

yeah it looks real nice

[Wicked Monkey]

That looks great man! Can't wait to see some vid of it. Nice work on the electronics too MitchellY.

[EverettY]

Originally Posted by TedBull

Damn Everett, You did good. That's a hell of a truck you got there. I like it.

HAHA Thanks! I'm really liking it turned out better than I'd hoped for the way it sits...

Originally Posted by redrokin00XJ

HOT DAMN!!!!!! Ev...... Good job buddy, I like it a lot. This whole time I thought you didn't have an XR.... j/p


This is sick, you did it right. However I did expect more PURPLE lol

You really thought that? I am ashamed of you...

Hmmf You will see more purple and you will be jealous

Originally Posted by douwe

Great work Everett, o really like to see how it performs.. nice list of parts and very nice weights

Thanks! It's a great looking design and I hope it performs as well as it looks

Originally Posted by Tomy

Very clean wiring job!

Yes I really like it.. Turned out better than I expected...

Originally Posted by roxx

yeah it looks real nice

Thanks!

Originally Posted by Wicked Monkey

That looks great man! Can't wait to see some vid of it. Nice work on the electronics too MitchellY.

Thanks! I will hopefully get some vid up next week but I can't promise anything

[joshsmith512]

very nice everett, very impressive parts list. cant wait for tommorow

[Crawling Calvin]

Sorry for the pics at an angle... I hate the new Google+ Picasa interface

[winnerone23]

How much did the plates weigh after the mill job?

[HARDKNOCKZ]

Well looky who got himself a big boy truck. I'm not sure about all that purple but do you junior.

Congrats on finally having a nice rig.

J.D.

[EverettY]

Originally Posted by winnerone23

How much did the plates weigh after the mill job?

Hmm I can't remember exactly but I think it was like 3 grams so it's like 7 or 8 grams a plate now so not bad at all

Originally Posted by HARDKNOCKZ

Well looky who got himself a big boy truck. I'm not sure about all that purple but do you junior.

Congrats on finally having a nice rig.

J.D.

LOL... I wanted something different and I think it looks pretty cool

Thanks!

[losiking1]

Great looking build Everett Love the purple as it's been my colour forever. I did go a little different with my XR... orange and black was my choice. Back in the day i built a Trinity 1/10 oval car with everything purple including a purple metalflake cf chassis. It was freakin awesome!! Hope it works well for you