Robbobs Not reinventing the wheel ........

[stankulas]

Outstanding course 3 run

[Stormin2u]

Great stuff Rob your a guy to watch.

Norm

[Robbob]

Originally Posted by stankulas

Outstanding course 3 run

Thank you - Gate 8 was my fault, I knew that rock moved lol

Originally Posted by Stormin2u

Great stuff Rob your a guy to watch.

Norm

Thanks Norm, its definitely interesting when I run


Just a little throw out to the 5Dimension Dominator though ..... this chassis is coming in real good. If a phone call didn't break my concentration (coughpurpcoughlol) I could have been a contender.
Really came together for course 2 & 3 ...... and the courses only got harder.

[blandon]

Course 3 was a tough one!! And the drop offs into a water hazard always adds a nice touch!! Nice driving, that chassis is definitely going to work out great for you

[BC-Brian]

Originally Posted by Robbob

Thank you - Gate 8 was my fault, I knew that rock moved lol




Thanks Norm, its definitely interesting when I run


Just a little throw out to the 5Dimension Dominator though ..... this chassis is coming in real good. If a phone call didn't break my concentration (coughpurpcoughlol) I could have been a contender.
Really came together for course 2 & 3 ...... and the courses only got harder.

WOW, blaming a phone call on your driving huh

Just bustin on ya, I am liking those negative scores, looks like it is coming back to you.

[Robbob]

Originally Posted by BC-Brian

WOW, blaming a phone call on your driving huh

Just bustin on ya, I am liking those negative scores, looks like it is coming back to you.

.....


Ya it felt good seeing them after my last few outings. We'll see what can happen with a little more practice one of these weeks.

[stankulas]

Just bustin on ya, I am liking those negative scores, looks like it is coming back to you.[/QUOTE]

Quite from rocky 4 I think

You see he's just a man . No he's steel ( in Russian )

[Robbob]

Not much of an update .... testing a couple new things on the bench and maybe even rocks this weekend. Plus a little shot at the krazy house workings for expansion.







Watercooling what ? ................ More to come on this but some should know what it all gos to.

[JENS]

Originally Posted by Robbob

Really love your build

One thing,-is it easy to mess up when drilling for brass inserts,-and what inserts do you use ?

[Robbob]

Originally Posted by JENS

Really love your build

One thing,-is it easy to mess up when drilling for brass inserts,-and what inserts do you use ?

Thank you.

Mcmaster-Carr is where we get them over here.

Press-Fit Expansion Inserts for Plastics
#94510a030

McMaster-Carr

Its not to difficult at all to do them. Drill press and a good bit with a steady hand. I normally press them in and put a little CA on them then put a 3mm tap in them to clar the glue out.

Havent pulled one out yet and did it several times on my original MOA.

[JENS]

Originally Posted by Robbob

Thank you.

Mcmaster-Carr is where we get them over here.

Press-Fit Expansion Inserts for Plastics
#94510a030

McMaster-Carr

Its not to difficult at all to do them. Drill press and a good bit with a steady hand. I normally press them in and put a little CA on them then put a 3mm tap in them to clar the glue out.

Havent pulled one out yet and did it several times on my original MOA.

Thanks I have done the brass insert mod on my Losi axles.
But the XR10's does'nt have that much material around the hole,-and depth when drilling is very important I think ?

[Robbob]

Originally Posted by JENS

Thanks I have done the brass insert mod on my Losi axles.
But the XR10's does'nt have that much material around the hole,-and depth when drilling is very important I think ?

I know the two critical ones are above the locker bearings but Ive always drilled through then clean the edges up inside and glue the insert in. All the other holes I only go down about 6mm and press in till flush with the top.

[Robbob]

Wired ..... hoping the postman has some good news for me today or its off to figure out a custom bracket.

Still have to get the 110 and 220 wired over to it but that's the easy part.

[blandon]

Originally Posted by Robbob

Wired ..... hoping the postman has some good news for me today or its off to figure out a custom bracket.

Still have to get the 110 and 220 wired over to it but that's the easy part.

Nice clean layout, looks awesome!!! I love that you already have the Krazed Builds stickers on there!!!

[rob_b]

Yet no SMW. Where's the love?

Was the mailman good to you?

[blandon]

He's gone quiet on here, must be building something cool!!!

[rob_b]

Or he is doing yard work.

[blandon]

Oooh, could be yard work, if that's the case..... That Sucks!!

[Robbob]

Originally Posted by rob_b

Yet no SMW. Where's the love?

Was the mailman good to you?

Oh I got those and some classics to still put up too.

He was but the gods werent. Plate looks good but the holder is to narrow for the plate. Gotta make sure the plate mounts first then maybe mail it off to my favorite machinist for some work.

Originally Posted by blandon

He's gone quiet on here, must be building something cool!!!

Oh I was .... involved 50ft of 12/3 wire, a breaker box and some electricty. I got juice in the new corner, now just gotta get the machine mounted up.

[blandon]

Can't wait to see it fully operational!!