Sensored Outrunner motors- Revolver S

[Oldskoolcj]

Originally Posted by dezrik

Time to start a project with just a motor

Been there done that



300kv sensored outrunner with a 1.7:1 transfer case!

Nice product John, any chance for lower KV offerings?

[the kil]

Keeping my fingers crossed for a revolver stubby someday...


Would this motor work with a mamba micro X ?

[slimfire]

Originally Posted by JohnRobHolmes

We did if he sent it, I'm not where I can check.

Shipment of the motor parts landed yesterday, and I'm happy to say they made what I wanted! I'll assemble a few into full motors for sensored testing and then we will have the first batch of 540 size up for sale.

Hi John
Been waiting for the revolver full size for ages.... I am excited about this good news!

Any chance to pre-order or reserve one for me (including a BLE pro wp)??

Thanks!!!

[JohnRobHolmes]

Originally Posted by Oldskoolcj

Been there done that

300kv sensored outrunner with a 1.7:1 transfer case!

Nice product John, any chance for lower KV offerings?

This batch has 2000ish and 1500ish KV, and we will indeed offer some slower versions too. Nothing as slow as 300kv is planned right now, unless we step up to the next biggest stator.

electric skateboard motor, or one you built yourself?

Originally Posted by the kil

Keeping my fingers crossed for a revolver stubby someday...


Would this motor work with a mamba micro X ?

No problems with the micro X, they make a good mate actually. We will be making stubbies on the next batch. I wanted to ensure the factory could follow orders in bulk before getting everything back in action.

Originally Posted by slimfire

Hi John
Been waiting for the revolver full size for ages.... I am excited about this good news!

Any chance to pre-order or reserve one for me (including a BLE pro wp)??

Thanks!!!

Email us through the site and we will do our best

[Oldskoolcj]

Originally Posted by JohnRobHolmes

Electric skateboard motor, or one you built yourself?

Got it from a small shop that does custom work in Wales UK.

Here are the specs:

KV: 300
MAX POWER: 1500W
WIRE WINDS: 9
MAX AMP: 50A
ESC: 80/100A
MAX VOLT: 6S
RESISTANCE (Ohm): .37
NO LOAD CURRENT: 4,2
SIZE: 42 x 60 ( without shaft )
WEIGHT (g): 0,245
SHAFT: 5mm with 2mm keyway
Inrernal PCB with 120 degree hall effect sensors

If that helps

[slimfire]

Originally Posted by JohnRobHolmes

"Hi John
Been waiting for the revolver full size for ages.... I am excited about this good news!

Any chance to pre-order or reserve one for me (including a BLE pro wp)??

Thanks!!!
Share
__________________
- slim -"

Email us through the site and we will do our best

I did email you via your website!

look forward to hearing from you soon!!

[Dodgeguy]

Will this be capable of being waterproofed? I assume so, just checking to make sure.

Also i'm building an scx10 powerwagon from the ground up, on 1.9 pitbull rockbeasts, i want smooth startup and torque, have any other recomendation besides this? I was going to buy the revolver s, but your site says out of stock lol.

[snapon boy]

Look at the stubby brushless sensored motor from Holmes

[HahnsB2]

I'm working on a 1/6 scale IH CXT build, will probably be somewhere around 13lbs or better. I've got a BLE and a Trailmaster Pro 3300kv, but the more I think about it a Revolver seems like it would be the way to go for a big heavy rig. The TM Pro had lots of power in my Wraith, and I plan on gearing it 10/54 in the IH build, is it enough motor or should I opt for a Revolver? ETA when they'll be in stock?

[JohnRobHolmes]

I'll be shooting to get some 540s built up next week. I would suggest that or the Puller Pro 540.

[slimfire]

Originally Posted by JohnRobHolmes

I'll be shooting to get some 540s built up next week. I would suggest that or the Puller Pro 540.

Do u accept pre order?

[JohnRobHolmes]

Originally Posted by slimfire

Do u accept pre order?

No!! But we do accept regular orders. 10 pc each 1400kv and 1800kv on the site right now. Please allow two weeks building time. I have more inventory, but we have to work these into production gradually because of our current workload and backorder list.

Holmes Hobbies LLC

[JohnRobHolmes]

you could hear the death rattle of me posting this here and on Facebook. 0 response and all of the 1800 kV version sold in an hour. Everybody's waiting to get theirs before they share, lol. I'm going to add 10 more to the site of the Kv that you want

[slimfire]

Originally Posted by JohnRobHolmes

you could hear the death rattle of me posting this here and on Facebook. 0 response and all of the 1800 kV version sold in an hour. Everybody's waiting to get theirs before they share, lol. I'm going to add 10 more to the site of the Kv that you want

are there more or not?
I was too late because of different time zone....

[JohnRobHolmes]

They got bought too. Two weeks I'll out up more. Or faster if we push them through production early.

[slimfire]

Originally Posted by JohnRobHolmes

They got bought too. Two weeks I'll out up more. Or faster if we push them through production early.

ok..please kindly inform me via email like you did yesterday so I can place my order asap

[Alexander_0_1]

Originally Posted by JohnRobHolmes

They got bought too. Two weeks I'll out up more. Or faster if we push them through production early.

Son-of-a! I was working, I think I forgot to confirm with Justin to notify me when they went on sale.

[JohnRobHolmes]

Gonna put up some more tomorrow about 4pm central. Got almost all of the current orders shipped today.


Found some motors in the 1800kv batch that were wound proper, but left handed. No big deal (for me at this point), it just has the sensor port on the other side now.


I've probably said it before, but getting these to market like any other motor has been anything but straightforward. But this new batch is so smooth driving, best production run to date. I'm glad I've been sticking with it. Now it needs some improvement to make assembly easier for us.

[SDheavymetal]

What's the battery is recommend? 3 cell or 4 cell?

[spoo76]

According to what I've seen on the website 3s max