GT3B Hack Question and Answer Thread

[Bully2RockRomper]

Hi Losi will you have the hacked gt3b's in stock again soon, or are they pre-order?

[losikid]

Originally Posted by Bully2RockRomper

Hi Losi will you have the hacked gt3b's in stock again soon, or are they pre-order?

I don't intend to stock GT3B's anytime soon, if ever.

The GT3C is in stock right now, however, and is a better radio in my opinion.

[WesTX]

So do you sell them hacked already and with a 6 ch receiver for those of us who aren't very computer literate and literate with coding, etc? Just starting to read up on the GT3C for my new build and need some extra channels for lights and such so trying to figure out how to do it and lost already!

Wes

[losikid]

Originally Posted by WesTX

So do you sell them hacked already and with a 6 ch receiver for those of us who aren't very computer literate and literate with coding, etc? Just starting to read up on the GT3C for my new build and need some extra channels for lights and such so trying to figure out how to do it and lost already!

Wes

Yes sir I do

Flysky GT3C

[WesTX]

When are you expecting more RX's?

Wes

[losikid]

Originally Posted by WesTX

When are you expecting more RX's?

Wes

Not for awhile...

I suggest buying them from hobbypartz

[vava_sp]

Hi...

I tried many times to use 3 pos.Sw in the gear of my Tamiya F350 and have no success. I just got 2 position servo.
I appreciate if somebody could help me to do this.

[]s

Vava

[Sapes]

Originally Posted by losikid

I don't have this issue.

Make sure your radio is calibrated (turn steering wheel max clockwise then enter-LONG to enter the calibration menu)

Also, are you using any trim?

I found the calibration mode. No mention of it in the manual. I have no idea what to do once I enter calibration mode. Also I tried using my end points funtion to limit the throw on my servo and it only lets me adjust the end points in one direction.

[losikid]

Just a heads up, I have final exams next week so I may not be paying much attention to my email or get orders shipped out. All current orders should be out here in a day or two. Any orders placed towards the end of the week and next week won't ship till after I'm done with finals.

[CODYBOY]

Originally Posted by Sapes

I found the calibration mode. No mention of it in the manual. I have no idea what to do once I enter calibration mode. Also I tried using my end points funtion to limit the throw on my servo and it only lets me adjust the end points in one direction.

If you go to the google custom search box and ask how to calibrate gt3c. That is how I learned to calibrate mine.

[amatris1996]

hi i got the hack done on my GT3C 6.1 firmware, and also brought a Turnigy 9X 2.4GHz 8Ch Receiver

but it will not bind... is this because its Not a Gt3b? what am i doing wrong?


cheers

[losikid]

Originally Posted by amatris1996

hi i got the hack done on my GT3C 6.1 firmware, and also brought a Turnigy 9X 2.4GHz 8Ch Receiver

but it will not bind... is this because its Not a Gt3b? what am i doing wrong?


cheers

You need to make sure you're following the binding instructions for that particular rx.

[Cammmo]

Originally Posted by losikid

Just a heads up, I have final exams next week so I may not be paying much attention to my email or get orders shipped out. All current orders should be out here in a day or two. Any orders placed towards the end of the week and next week won't ship till after I'm done with finals.

Just wondering if anything shipped (especially mine) before finals?

[Bully2RockRomper]

Hi OKRC, will you have more of your GT3B's available soon?

After 2 of them if possible?

[DRTMI]

Originally Posted by Bully2RockRomper

Hi OKRC, will you have more of your GT3B's available soon?

After 2 of them if possible?

11 posts above yours.

[Bully2RockRomper]

Thank you.

[vava_sp]

There are anyone that use this firmware to shift gear in Tamiya F350 High Lift ?
I need help to do this configuration.

[drewbagel423]

Hey guys, I hacked my GT3B with 0.6.1 firmware, but now I can only adjust the steering endpoints in one direction, to the right. When I turn the steering wheel, it doesn't change which way the arrow is pointing. Anybody else experience this?

[amatris1996]

how do i set crab on/off on the Th trim button?, and 4ws on the D/r, and Channel 3 trim as the rear servo trim? cheers

[crawlerwon]

Originally Posted by Sapes

Also I tried using my end points funtion to limit the throw on my servo and it only lets me adjust the end points in one direction.

Have you figured this out? I also have a gt3b that i just hacked with the 0.6.1 firmware. but i can only adjust the end points to the right. The tx works to steer the truck left but i cannot get the arrow on the screen to point left when i turn the wheel c.c. in the endpoint menu... why? Its driving me nutz everything worked before i did the hack. I have recalibrated the tx and tried everything i can think of.