RCCrawler Forums

slobin3d · 03-08-2011, 01:54 PM

Quote:

Originally Posted by chino63

Well, after reading the rules thread again, Class 2 doesntsay anythingabout a CC-01 chassis being allowed.

Here's what it says:

• Vehicle must run a full length rail chassis (The rail chassis must be as long as the vehicles wheelbase extensions are legal for bumpers as long as the chassis meets other specs)

However, in the general vehicle details it says:

• You must run a rail chassis (for example: Bruiser/Mountaineer, SCX-10, Reign RC K2-3S, 3L, 4, 5, MFM, X-Trail, CR-01, UTE, etc...) No TVP (twin vertical plate) chassis' or frame rail extensions on a TVPs. The exception to this rule is the Tamiya CC-01 or TA-02 ,(Hummer, S-10, Ford F-150 and Toyota Hilux)and Modified class Tubers.

Please tell me I can run it in class 2. Or else I just spent a ton of money and time for nothing.

yes you can

chino63 · 03-08-2011, 03:10 PM

Quote:

Originally Posted by slobin3d

yes you can

Thanks, wasn't sure, had me worried.

PinchFlat · 03-08-2011, 03:13 PM

Quote:

Originally Posted by chino63

Thanks, wasn't sure, had me worried.

I swear Chino... If you kick all our asses with a CC01 I will never talk to you again.

EDIT: And I'll take my Avatar down.

I love how people underestimate the CC01

chino63 · 03-08-2011, 03:22 PM

Quote:

Originally Posted by PinchFlat

I swear Chino... If you kick all our asses with a CC01 I will never talk to you again.

EDIT: And I'll take my Avatar down.

I love how people underestimate the CC01

Man, you're gona make me cry. Not because you won't talk to me any more but the avatar thing... that's just plain mean.

PinchFlat · 03-08-2011, 03:23 PM

Quote:

Originally Posted by chino63

Man, you're gona make me cry. Not because you won't talk to me any more but the avatar thing... that's just plain mean.

XSRCdesign · 03-08-2011, 04:26 PM

Dean,

I will be loosening all your wheel nuts, just sayin..

chino63 · 03-08-2011, 04:58 PM

Quote:

Originally Posted by exesivefire

Dean,

I will be loosening all your wheel nuts, just sayin..

Chino sad now.

chino63 · 03-11-2011, 01:16 PM

I'm curious to know if you guys have figured out how deep the water and especially the mud will be for class 1 and class 2?

team3six · 03-11-2011, 01:33 PM

Quote:

Originally Posted by chino63

I'm curious to know if you guys have figured out how deep the water and especially the mud will be for class 1 and class 2?

They are building special courses for you. 2 foot deep waterfalls

Last I talked to Tim, he doesn't believe any.
basically because there isn't any flowing water near by. TTC Is different. Course will be near by, but landowner is allowing the course to be modded to fit TTC and add water.

XSRCdesign · 03-11-2011, 06:30 PM

Quote:

Originally Posted by team3six

They are building special courses for you. 2 foot deep waterfalls

Last I talked to Tim, he doesn't believe any.
basically because there isn't any flowing water near by. TTC Is different. Course will be near by, but landowner is allowing the course to be modded to fit TTC and add water.

except if it rains again, all bets are off..

slobin3d · 03-11-2011, 06:38 PM

Quote:

Originally Posted by exesivefire

except if it rains again, all bets are off..

Curse you and this moisture you speak of!

chino63 · 03-11-2011, 07:32 PM

Damn, I want mud.

Rain again? I hope not, I destroyed my rain suit last year. Ripped the crotch out of it when I face planted down the hill. Thank goodness only one person saw that I know of.

Mad4Rnr · 03-11-2011, 07:38 PM

Quote:

Originally Posted by exesivefire

except if it rains again, all bets are off..

I can handle the rain as long as I don't have a freakin' cast on my hand again, that was some musty funk after 3 days in the rain

I feel sorry for Dean who had to share a room and car ride home

Quote:

Originally Posted by chino63

Damn, I want mud.

Rain again? I hope not, I destroyed my rain suit last year. Ripped the crotch out of it when I face planted down the hill. Thank goodness only one person saw that I know of.

sorry man, I just laughed a little remembering you, yellow suited with Dx6 in hand sliding down the hill

@tw!ll · 03-12-2011, 10:41 AM

Question on driver figures. Is a terminator considered humanoid enough?

team3six · 03-13-2011, 04:23 PM

Truthfully, I couldn't tell you.
My opinion is it would be. Are you taking about the exoskeleton figure? because i drive the Arnold one and it is legal.

War Pig · 03-13-2011, 07:19 PM

Quote:

Originally Posted by @tw!ll

Question on driver figures. Is a terminator considered humanoid enough?

If it looks like a person, fine. If it's the robot version, then no.

PinchFlat · 03-13-2011, 07:27 PM

Quote:

Originally Posted by War Pig

If it looks like a person, fine. If it's the robot version, then no.

That's getting a bit picky in my opinion. Well then if picky it is, just get some red & white plasti dip and mix them to make pink and dip the robot terminator in it... Instant naked driver guy... or yellow would work I guess.

@tw!ll · 03-14-2011, 09:54 AM

Quote:

Originally Posted by War Pig

If it looks like a person, fine. If it's the robot version, then no.

It's the robot one.

Quote:

Originally Posted by PinchFlat

That's getting a bit picky in my opinion. Well then if picky it is, just get some red & white plasti dip and mix them to make pink and dip the robot terminator in it... Instant naked driver guy... or yellow would work I guess.

Lol sounds like a lot of work, but I like the way you think.

For one point, I think I'll just go with the robot. Afterall there's many a day I feel like a cybernetic organism hell bent on the destruction of all human kind. Or at least the idiots you encounter in every day life.

PinchFlat · 03-17-2011, 01:05 PM

Ben, Aaron or Tim.
A Street/Class1 question:

Can I cut the tailgate of my Street/C1 rig? I want a drop bed with an open rear (no tailgate). Like a Hilux, Trail Ranger, FJ or Bronco with no tailgate (it would have a drop bed). Can I do that and still be legal in Street/C1 Class in Montana.

Thanks Ben, Aaron or Tim.

War Pig · 03-17-2011, 02:07 PM

As long as you have a drop bed, removing the tailgate would be fine.

03-08-2011, 04:26 PM	#146
XSRCdesign I wanna be Dave Join Date: Aug 2005 Location: NE Ohio Posts: 8,817	Dean, I will be loosening all your wheel nuts, just sayin..

03-11-2011, 01:16 PM	#148
chino63 Oppan Gangnam Style Join Date: Jun 2005 Location: Shingle Springs Posts: 5,164	I'm curious to know if you guys have figured out how deep the water and especially the mud will be for class 1 and class 2?

03-11-2011, 07:32 PM	#152
chino63 Oppan Gangnam Style Join Date: Jun 2005 Location: Shingle Springs Posts: 5,164	Damn, I want mud. Rain again? I hope not, I destroyed my rain suit last year. Ripped the crotch out of it when I face planted down the hill. Thank goodness only one person saw that I know of.

03-12-2011, 10:41 AM	#154
@tw!ll RCC Addict Join Date: Feb 2006 Location: Medford, Oregon Posts: 1,261	Question on driver figures. Is a terminator considered humanoid enough?

03-13-2011, 04:23 PM	#155
team3six www.team3sixrc.com Join Date: Mar 2008 Location: Scalerville Posts: 4,506	Truthfully, I couldn't tell you. My opinion is it would be. Are you taking about the exoskeleton figure? because i drive the Arnold one and it is legal.

03-17-2011, 01:05 PM	#159
PinchFlat Say hello to my dactylion Join Date: Jun 2004 Location: On the Boat to Whore Island Posts: 4,470	Ben, Aaron or Tim. A Street/Class1 question: Can I cut the tailgate of my Street/C1 rig? I want a drop bed with an open rear (no tailgate). Like a Hilux, Trail Ranger, FJ or Bronco with no tailgate (it would have a drop bed). Can I do that and still be legal in Street/C1 Class in Montana. Thanks Ben, Aaron or Tim.

03-17-2011, 02:07 PM	#160
War Pig I wanna be Dave Join Date: Jul 2006 Location: The beautiful Pacific Northwest Posts: 6,923	As long as you have a drop bed, removing the tailgate would be fine.

Sponsored Links

RCCrawler Forums

Thread: * Official 2011 Scale Rules Questions Thread *