RCCrawler Forums

JasonInAugusta · 12-18-2012, 03:38 PM

Quote:

Originally Posted by NCT_Guy

With as many channels this rig has, how many pilots does it take to run on the rocks?

Really this rig is amazing, I in no way have the kind of patience or knowledge for a build like this, but I enjoy watching and dreaming about it one day

5 channels. One 4PKS. One Stig.

With enough time you can do anything you want. Just have to put your mind to it.

JasonInAugusta · 12-18-2012, 06:39 PM

How's this look for a logo on the side panels?

MiniMorris · 12-18-2012, 07:15 PM

^^ Will it match your skinz?

JasonInAugusta · 12-18-2012, 07:21 PM

Quote:

Originally Posted by MiniMorris

^^ Will it match your skinz?

Just using the text and logo there. Creating an Axial Racing logo and using that instead of the Poison Spyder Racing logo.

dirk379 · 12-18-2012, 07:38 PM

Quote:

Originally Posted by JasonInAugusta

Wiring diagram is done for those interested.

. i hate wiring up stuff, couldn't imagine doing that. id have to go back through and check everything 6 times to get it all working properly. good job sir

JasonInAugusta · 12-18-2012, 10:40 PM

Quote:

Originally Posted by dirk379

. i hate wiring up stuff, couldn't imagine doing that. id have to go back through and check everything 6 times to get it all working properly. good job sir

That's pretty much where I am as I build. Cable routing is a huge obstacle as well.

This was easier.

22 switches, 36 relays, and 311 connections for the wiring and it all checked out 100% the first time around. Did that in a day.

JohnRobHolmes · 12-18-2012, 10:50 PM

I would be interested in your wiring diagram! I'm having a helluva time thinking about how mine will best layout. 3 servos, two ESCs, BEC, rX, lights, and battery to lay out, along with a few other components going in. Then actually routing and positioning, its a bit of planning!

JasonInAugusta · 12-18-2012, 11:44 PM

Quote:

Originally Posted by JohnRobHolmes

I would be interested in your wiring diagram! I'm having a helluva time thinking about how mine will best layout. 3 servos, two ESCs, BEC, rX, lights, and battery to lay out, along with a few other components going in. Then actually routing and positioning, its a bit of planning!

It's here: JIA's IFS Ultra4 build

You'll have to ignore portions of the top right of the diagram. I got lazy and terminated the negative for the LEDs on the battery side of the connector and some other small things.

DISTURBIN' tha PEACE · 12-19-2012, 10:52 AM

Quote:

Originally Posted by JasonInAugusta

How's this look for a logo on the side panels?

You should get a professional to do it.

Not some cheesey cut & paste MS paint crap.

JasonInAugusta · 12-19-2012, 01:59 PM

Quote:

Originally Posted by DISTURBIN' tha PEACE

You should get a professional to do it.

Not some cheesey cut & paste MS paint crap.

Mike's a machinist, not a graphic artist.

I'm going to print some stuff out on paper, attach it to my RTR Wraith panel and see how it looks.

YoUnG_vErSiOn · 12-19-2012, 02:33 PM

not to be mean or anything, but it looks a bit under resolution for print quality. id go with a vectored image for a much cleaner image. im no graphic artist by trade or anything...

but i just trace vectored a logo from axials website inside my work truck.
Name: Screen Shot 2012-12-19 at 11.31.49 AM.png
Views: 1778
Size: 21.2 KB

Name: Screen Shot 2012-12-19 at 11.31.49 AM.png
Views: 1778
Size: 21.2 KB

took me all of five minutes.

YoUnG_vErSiOn · 12-19-2012, 02:39 PM

Quote:

Originally Posted by JasonInAugusta

Got another switch a few days ago.

Been messing around routing all the wires so they go where they need to and allow the interior pan to sit properly. Also been trying to keep maintenance in mind as I wire it all. That's been fun.

Random picture. Just because.

yes because you are. this thing is way beyond my expectations...and i get to see it all the time. lol.

JasonInAugusta · 12-19-2012, 04:02 PM

How's this look?

I printed this on standard printer paper and used template tape to stick it to the Wraith panel. Had to print it in two pieces because it wouldn't fit on a standard sheet of notebook paper.

The 1:1

My rig with notebook paper skins.

motomoto · 12-19-2012, 04:19 PM

Looking great man. Looks a little washed out cause of the paper but otherwise awesome!

JasonInAugusta · 12-19-2012, 04:25 PM

Yeah, it's washed out a bit and the camera phone didn't help.

Still some work to do, but it'll get there.

Harley · 12-19-2012, 04:41 PM

Really pulled off the design

DISTURBIN' tha PEACE · 12-19-2012, 04:41 PM

Quote:

Originally Posted by JasonInAugusta

How's this look?

So easy a caveman could do it.

JasonInAugusta · 12-19-2012, 04:43 PM

Quote:

Originally Posted by DISTURBIN' tha PEACE

So easy a caveman could do it.

We've been through this. It's not a cave, it's a garage.

Or a hut.

DISTURBIN' tha PEACE · 12-19-2012, 04:46 PM

I need to get over there soon.

JasonInAugusta · 12-19-2012, 04:50 PM

Any time.

12-18-2012, 06:39 PM	#602
JasonInAugusta 06 Super National Champ Join Date: Jun 2004 Location: Stark Industries Bar and Grill Posts: 11,361	Re: JIA's IFS Ultra4 build How's this look for a logo on the side panels? Attached Images Last edited by JasonInAugusta; 12-18-2012 at 06:52 PM.

12-18-2012, 07:15 PM	#603
MiniMorris Quarry Creeper Join Date: Jan 2012 Location: Bloomington Posts: 371	Re: JIA's IFS Ultra4 build ^^ Will it match your skinz?

12-18-2012, 10:50 PM	#607
JohnRobHolmes owner, Holmes Hobbies LLC Join Date: Nov 2004 Location: Volt up! Gear down! Posts: 20,290	Re: JIA's IFS Ultra4 build I would be interested in your wiring diagram! I'm having a helluva time thinking about how mine will best layout. 3 servos, two ESCs, BEC, rX, lights, and battery to lay out, along with a few other components going in. Then actually routing and positioning, its a bit of planning!

12-19-2012, 02:33 PM	#611
YoUnG_vErSiOn REST IN ALOHA CHIP Join Date: Nov 2005 Location: * Posts: 3,549	Re: JIA's IFS Ultra4 build not to be mean or anything, but it looks a bit under resolution for print quality. id go with a vectored image for a much cleaner image. im no graphic artist by trade or anything... but i just trace vectored a logo from axials website inside my work truck. took me all of five minutes.

12-19-2012, 04:02 PM	#613
JasonInAugusta 06 Super National Champ Join Date: Jun 2004 Location: Stark Industries Bar and Grill Posts: 11,361	Re: JIA's IFS Ultra4 build How's this look? I printed this on standard printer paper and used template tape to stick it to the Wraith panel. Had to print it in two pieces because it wouldn't fit on a standard sheet of notebook paper. The 1:1 My rig with notebook paper skins.

12-19-2012, 04:19 PM	#614
motomoto Pebble Pounder Join Date: Aug 2012 Location: Minneapolis Posts: 140	Looking great man. Looks a little washed out cause of the paper but otherwise awesome!

12-19-2012, 04:25 PM	#615
JasonInAugusta 06 Super National Champ Join Date: Jun 2004 Location: Stark Industries Bar and Grill Posts: 11,361	Re: JIA's IFS Ultra4 build Yeah, it's washed out a bit and the camera phone didn't help. Still some work to do, but it'll get there.

12-19-2012, 04:41 PM	#616
Harley 20K Club Join Date: Jul 2004 Location: Sending illegals home one Hayabusa at a time. Posts: 22,981	Re: JIA's IFS Ultra4 build Really pulled off the design

12-19-2012, 04:46 PM	#619
DISTURBIN' tha PEACE I wanna be Dave Join Date: Jun 2005 Location: On the G-Train!!!!! Posts: 6,081	Re: JIA's IFS Ultra4 build I need to get over there soon.

12-19-2012, 04:50 PM	#620
JasonInAugusta 06 Super National Champ Join Date: Jun 2004 Location: Stark Industries Bar and Grill Posts: 11,361	Re: JIA's IFS Ultra4 build Any time.

LinkBacks (?) LinkBack to this Thread: http://www.rccrawler.com/forum/axial-wraith/388684-jias-ifs-ultra4-build.html
Posted By	For	Type	Date
RC Elétrico - o fórum de automodelismo elétrico! • Tópico: - Axial Wraith	This thread	Refback	03-01-2013 02:33 PM
Axial Racing - Project Wrexo – Bender’s Latest Custom Build	This thread	Refback	02-18-2013 03:40 PM

JIA's IFS Ultra4 build - Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Solid axle Ultra4 build	JasonInAugusta	Axial Wraith	79	07-08-2013 09:32 PM
DTP's KOH IFS Ultra4	DISTURBIN' tha PEACE	Scale Videos!	7	12-20-2012 09:21 AM
JIA's IFS KOH Ultra4 Wraith Conversions	JasonInAugusta	Chassis and Suspension	77	11-10-2012 10:27 PM
IFS axial build	red_zook	General Scale Talk	6	04-28-2012 08:43 AM
Ultra4/KOH build of doom	Ruff11	2.2 Scale Rigs	14	10-10-2011 08:11 PM

Sponsored Links

RCCrawler Forums

Thread: JIA's IFS Ultra4 build